Showing results: 1006 - 1020 of 2415 items found.
-
ATWRM-25 -
Eltel Industries
The Eltel ATWRM-25 with its latest " State of the art" design is an unmatched high performance of winding resistance measurement providing fast measurements, wide continuous test current ranges, high accuracy and is ideally suited for low resistance measurements both in the laboratory and in HV switchyards.
-
Shimadzu Corp.
Screw flat grips are general-purpose grips used for static tensile testing of a wide range of materials, most commonly, rubbers, plastics, textiles, and paper, and specimens such as plates and wires. Another advantage of these grips is they can be used to test thick specimens, up to 16 mm (0.63 in).
-
4Links Ltd.
This section details the 4Links range of high-performance test equipment that is used to monitor SpaceWire networks. These devices are attached to your SpaceWire systems and then can be accessed via Gigabit Ethernet, using the standard TCP/IP family of protocols, so that they can be controlled remotely (for instance, by partners collaborating on a mission).
-
INDEC -
KoCoS Messtechnik AG
INDEC vacuum test systems monitor a wide range of containers during the production process, including bottles, jars and cans, by measuring the cap panel concavity of their closures which is dependent on the vacuum inside. This non-contact inspection reliably identifies defective containers for automatic rejection.
-
YMP30-S -
Helmut Fischer AG
The hand-held sealing quality tester measures the admittance (Y) of anodic oxide films according DIN EN ISO 12373-5 and ASTM 457-67. Measuring range 3 200 S, with test cell 13 mm diameterInstrument calibration with optional accurate electrical reference
-
6910/1 -
Elcometer Limited
The Elcometer 6910/1 Setaflash 'Series 3' Closed Cup Tester is an easy to use instrument that can complete a flash/no flash test in less than two minutes or determine the flash point of a sample within a temperature range of ambient to 300°C (ambient to 572°F).
-
Flex 10 -
A.T.E. Solutions Ltd.
The Flex 10 bench mounted ATE is the smallest ‘standard’ tester in our range. The system comprises a single unit, measuring 600mm x 360mm x 660mm. A VPC S6 interface is normally used on this system allowing multiple test fixtures to be used with the system.
-
Whitelegg Machines Ltd
Whitelegg has over 80 years of experience in the design manufacture of market-leading electrical safety test equipment. Our unrivalled range of electrical test equipment serves a wide variety of safety testing and precision measurement applications for use in a variety of industries including manufacturing, construction, education, utilities, aerospace, calibration and anywhere else where there is a requirement for electrical safety testing or precision resistance measurement.Test equipment is cost effective, helps you to minimise expense, improve efficiency and increase profit. Whether you need electrical test equipment, environmental test, power analysers or HV Test Equipment, we stock the products to meet your demands, all backed by our first-class technical support if you have any problems using the equipment.
-
Saluki Technology Inc.
S3871X series is a broadband benchtop solid state power amplifier and incorporates the patended spatial power combination technology. It is designed to have features of broad bandwidth, high gain, high power, wide dynamic range, low spurious signals and extremely load tolerant. These features enable the amplifier to be used as a cable test instrument covering multiple frequency bands.*Wide frequency range, 9kHz to 110GHz, max. 500W output power*
-
Premier Electrosystems
Premier Electrosystems' Test Finger meets the standard requirements of IS guidelines. The Test Finger are wide range of probes used to meet the most common standards including those from BIS, IEC, EN, and others. Such standards require the checking of accessibility to exposed parts of home electronics and appliances, toys, tools, and a host of other products that are intended to be protected by enclosures. These probes simulate human fingers, tools, and other items that would be hazardous to come in contact with.
-
MicroClimate 3 -
Cincinnati Sub-Zero Products
The MicroClimate 3 is a compact environmental chamber designed to simulate a full range of temperature and/or humidity conditions. The small footprint of the MicroClimate 3 combined with temperature and humidity capabilities make this chamber the number one choice for testing small components and products. Whether you need to perform temperature cycling tests or expose your product to steady state temperature environments, these chambers will maintain precise and accurate temperature/humidity control throughout your test.
-
SKZ129A -
SKZ Industrial Co., Ltd
This tester is applied to test the wear ability of vulcanized rubber. It tests the abrasion consumption in certain testing range by the friction under certain tilt angle and load. The machine is designed according to GB/T 1689-1998: Rubber vulcanizedDetermination of abrasion resistance (Akron machine) equal to ISO:4661-1:1993, ISO 2481:1988, ISO 471:1983, ISO 1826:1981, with digital setting and displaying the times of friction, automatically stop and integrate the host and controller.
-
Bobcat -
Fiber Instruments Sales Inc.
The Hand Held Bobcat OTDR has a generous 32 dB dynamic range and a short dead zone for testing FTTx fibers and networks up to the metro environment. It has an easy to read color display with fault finder, construction and expert/manual modes of operation. The OVP is shipped with Windows®/Telcordia SR-4731 compatible software that generates complete and professional documentation with the ability to include scope images and loss test results on the OTDR test reports.
-
BK9015 -
BaKo Co., Ltd
Based on the BK3011 MEMS Mic Tester, the BK9015 is our fully automatic 8 channel MEMS (Silicon) mic sweep tester. Testing up to 8 DUT's simultaneously, the BK9015 can test 8 mics simultaneously and sort them according to passing grade and cause of failure! Because it uses a sweep test, it can check characteristics for the entire frequency range. Your data can be viewed in real time or stored so you can analyze problems or trends.
-
900-392 -
Phase II Plus
The 900-392 Micro Vickers Hardness Tester is engineered to produce a clearer indentation and hence a more precise measurement. By means of a 10 × lens and a 40 × lens the 900-392 vickers hardness tester has a wide measurement field and a broad usage range. Equipped with a digital microscope, it shows the measuring methods, the test force, the indentation length, the hardness value, the dwell time of the test force as well as the number of the measurements, all shown on its LCD screen.